|
Why haven't you replaced your existing switches to Touch-less Switches?
It helps you to prevent infection like bird-flu or SARS.
It helps the people with physical problem who can not press button.
Touch-less Switch “TENTOU MUSHI” is a replacement of an ordinary press-type lighting switch.
Its touch-free operation is perfect for hygienic purpose; therefore, it is ideal for lighting
switch which is expected to be used by indefinite numbers of people, for instance, public toilet
lighting, hospital toilet lighting, clean room lighting, hotel toilet lighting, and for all those
toilet lighting in; food factory, bio-chemical factory, pharmaceutical factory, brewery,
semiconductor factory…, etc. People who have disability with their fingers or hands can also
operate easily with their shoulder or part of wheelchair.
Not to mention that it can be installed at newly instructed house or replaced any existing press-
type lighting switches with touch-less switches at any common homes.
Features
- It is so easy to replace normal push-button switch with Touch-less Switch.
- The switch is clean and hygiene with the characteristic of touch-free operation.
- Capable for both AC 100V and 200V, it can be installed at home, office and even any counties.
- Relatively Low-price with its function and benefits.
- With its two-wire line design, just same as your existing switch. No rewiring needed during installation.
- It’s compact, so it can be fitted into your existing switch box on the wall where your normal push-button switch had been installed.
- Although it has been designed with a one-circuit line format, but it can be switched ON or OFF anytime (unlike a normal one-circuit line format set by timer) because it has been built-in with a storage device which stores micro electric power continually.
- Proof against interference - Meet EMI(Electro Magnetic Interference) test, classB. CISPR measurement method Pub.22 ( VCCI standard).
- The electrical safety standard conformity inspection passed. (ID No. JET2835-41012-1101, JET2835-41012-1002)
- Standby power consumption is comparatively low as an infrared-ray-emitting switch.
☆ Just one screw-driver will be needed for replacing an existing switch with a touch-less switch.
☆ Please ensure that the switch box with at least 32mm of depth.
☆ You can buy your own ready-made facing plate at any electrical accessory shops. |
The name of production |
TENTOU MUSHI, Touch-less Switch |
Major spec. |
Standard type |
Remote-control type |
1. Photoelectric switch |
Recurrence Reflection Type |
Recurrence Reflection Type |
2. Power rating for contacts |
AC100V, 200V, 3A |
AC100V~220V, 3A |
3. Construction of contacts |
Semiconductor |
Semiconductor |
4. Infrared Detection Distance |
Around 5cm~10cm |
Around 5cm~10cm by hands,
Around 6m by remote-controller |
5. Detection objects |
Human’s hand etc. |
Human’s hand and remote controller's signal |
6. Standby power consumption |
Around 15mA (At 100V) |
Around 20mA (At 100V) |
7. Indication lights |
Indication for operating (Red light) |
Indication for operating (Red light) |
8. Connection style |
Insert to terminal block |
Insert to terminal block |
9. Ambient temperature |
0°C~+35°C (No icing or condensation) |
0°C~+35°C (No icing or condensation) |
10. Ambient humidity |
35°C~85°C (No condensation) |
35°C~85°C (No condensation) |
Lighting fixture to
be able to use |
- Incandescent lamp (white heat lamp)
- Rapid lamp
- Halogen lamp
- Glow lamp of type32/30W or more
(When glow lamp type30/28W or less is used, lamp life will be extremely short.)
- Electronic glow bulb can not be used for the glow lamp.
- This product can be used with Toshiba Hf Mellow Line E(for medical facilities). For other lighting, please consult dealer or electric contractor.
|
| Condition for using |
- This switch is not water-proof. Do not use for Outdoor or inside of a bathroom, etc.
- This is limited for one-circuit. Do not use for three-circuit line.
- Do not use for Full-voltage mortar and High-heating stove
- Do not use as a switch for electronic devices.
- Mis-operation like “flickers” or “hunching” maybe occurred with some wattage rating for inverter
lamp and other lighting fixture. Checking before using is recommended.
- Do not feed large current exceed 3A.
|
| Purpose |
- Optimum use for the toilet's lighting.
- Optimum use for the clean room's lighting.
- And for other lighting.
|
| How to operate |
- Just get your hands closer to the front of Touch-less Switch to turn the light ON.
Indication Red lamp on the top will light. Get your hands closer to the front of
Touch-less Switch again to turn the light OFF.
- After you turned the light ON, the lights will keep ON by it’s maintain circuit
unless you get close your hands to the Touch-less Switch again.
- For remote-controller use, press one time to turn the light ON and press again to
turn it OFF.
|
| Others |
- This switch consumes very feeble current at OFF condition.
- Small green indicating lamp blinks for enabling you to find the switch at night.
|
| Patent Pending |
No. 2002-210057
No. 2002-210052
No. 2004-100377 |
| Installation |
- Installation must be made only by qualified electrical technician.
- Solid wire must be Ф1.6mm x 5mm at the cable side of installing wire.
|
| The guideline for connecting |
Power rating for contacts is set as 3A. Please use 8 rapid starter lamp 40W, as a guide.
If you pass large current, internal semiconductor will be broken and can’t operate.
Please note the capacity of power rating. Please take a measurement of current which
you are using by an ammeter to replace the switch. |
| Precautions |
Internal temperature may raise up to 55°C (ambient air temperature is at 25°C)
when it’s left ON for prolonged period with maximum current. Please be caution for the
heat when you check inside. |
* Please read instruction sheet before using.
|
