skip to: page content | links on this page | site navigation | footer (site information)

EXCEL ENGINEERING (HK) CO., LTD.

About Us | Contact Us | Web Master
Nurse Call System | RFID Position Detector | Remote surveillance | Care Helper | Cell-Phone Jammer | One Push Call | Touch-less Switch |
China | Japan | Technical Center | Hong Kong | United States | Switzerland |
Japan | United States | Switzerland |

Wet-Care Sensor

Wet-Care WS-900

Wireless Diaper Wetness Sensor


Wet-Care WS900 will let the care giver know when to change the diaper even if the patient cannot speak, or have no sensation of urination. This system will aid in communicating with the patient to provide the best care possible.

  • The patient will be kept sanitary because diapers can be changed as necessary. Prevents rashes and bedsores by keeping clean.
  • Will provide peace of mind by giving constant care.
  • Will improve the environment by changing the diaper before the odor gets strong.
  • Will improve the patient's desire to rehabilitate by receiving thorough care.

How to Use Wet-Care WS-900
Sensor Tape for Cloth Diaper   Sensor Pad for Paper Diaper

 

Sensor Tape is made of cellophane, aluminum, and a non woven fabric. It is very soft, and the patient will not feel it. 		 
Sensor pads will sense the moisture just by placing it on the outer surface of the diaper.


 


Sensor Tape with transmitter 		 
Sensor Pad with transmitter


 


Adapter holds the Sensor Tape and the transmitter 		 
Sensor Pad is directly connected into the transmitter


 


Set the sensor tape between the layers of the diaper. When the sensor tape is moistened, the transmitter will send out a signal to the receiver. 		 
Place the sensor pad on the outer surface of the diaper at the position where the diaper becomes wet inside. (using double sided tape). When the inside of the diaper gets wet, the transmitter will send out a signal to the receiver.

Sensor & Transmitter

  

Receiver

  • Good for both cloth diaper & paper diaper:
    -Sensor Tape for cloth diaper.
    -Sensor Pad for paper diaper.
  • Battery: 2 x AAA battery (included)
  • Battery life: one month (with alkaline battery)
  
  • Vibration alarm for maintaining quiet environment.
  • Alarm sound: high/low
  • Battery: Ni-MH rechargeable battery (included)
  • Battery life: 2 weeks with each recharging

Includes
1 Transmitter 60 x 60 x 23mm
2 AAA batteries for Transmitter
1 Sensor Tapes for Paper Ddiapers
100 Sensor Pad for Cloth Diaper

1 Receiver 100 x 68 x 19.5mm (antenna included)
1 AC adapter for the receiver
1 Ni-MH rechargeable battery for the receiver

User's Manual / Warranty Card

*The specifications may change without notice due to product remodeling.


About Us | Contact Us | Web Master | ©2006 Excel Engineering (HK) Co., Ltd.